Bosom Friend

About my bosom friend Jenia Frankly speaking, I chose Jenia, because she is my bosom friend. Moreover, we were studying at the same school, but to tell the truth, we know each other since we were preschoolers. But Jenia became my best friend only in the 10 th form. Jenia is a slim, pleasant – looking girl of about 17. Jenia is tall; she has a strong attractive body. Jenia is always elegant; her clothes are the latest fashion. Her features are very delicate she has sand shoulder – length hair and green eyes.Her eyelashes are long and thick. Her face is oval and she has a straight nose. Jenia has got a puffy and well-cut lips and she always has a sunny smile. To cut a long story short, Jenia is very beautiful girl. But I think, inner beauty is more important than physical one. Jenia is very tactful, generous, kind-hearted, but she isn’t shy at all – she is a chatterbox and know – all. She is always ready to help her friends. She used to help me at the math lessons.Math is her favorite subject, but I am, on the contrary, hate this subject. Jenia has in a habbit of helping her parents. Jenia is a person I associate with hobby. Hobby is what a person likes to do in his spare time. Hobbies differ like tastes. Jenia and I like handmade. We are interested in felting. Moreover, we have already done several funny animals, such as red cat, lion, rabbit, penguin , panda and etc. These toys we presented to our relatives and friends. I addition, Jenia goes in for sports and she is fond of tourism.Unusual as for girl, but she was in hikes several times, exactly 11. They were different categories of difficulty, it depends of place and distance. I think, it’s exciting hobby, and next spring I’ m going to join her. Jenia always tries to do her best to help somebody when he or she has some problems. What I like in her is that she always keeps her word and never boats. There is a proverb: a friend in need is a friend indeed. And I c ould say, these words are about my friend as Jenia, because she is a true one.

Kite Runner Connections with Skrzynecki

The Kite Runner is set in Afghanistan, about a young boy named Amir who feels that he must win the kite tournament in order to redeem himself to his father. Because his mother died while giving birth to Amir he feels somehow responsible for his mother’s death. His servant is his best friend, Hassan, who runs the kite for him. Amir feels as though he is not acknowledged or accepted by his father, therefore not feeling a sense of belonging when Baba (father) shows his love toward Hassan. This motivates Amir to not do anything about Hassan’s rape which later leaves him with guilt. Those who do not belong may commit acts that are not within their desire in order to belong. For example, after Hassan was raped Amir lied to his father saying that Hassan stole his watch and money from him causing them to be kicked out of their house as servants. Amir’s thoughts were that once Hassan had left, Baba’s love would be pointed toward him only, hence giving him a deeper sense of belonging to his father. Hassan on the other hand felt as though he belonged to the Afghan home of Baba and Amir even as a servant as he is treated with the same respect as the members of the family. However being Hazara’s, a minority ethnic group, Hassan would not have felt a sense of belonging on the macro scale for the reason that his rape was motivated due to the ethnic group he is from i. e. the minority in Afghanistan who are continuously discriminated against. After the Soviets invaded Afghanistan the country became a war-zone causing Amir and Baba to flee the country leaving all the memories and reminiscences in their country. Connections are shown with several of Skrzynecki’s poems, for example, St Patricks College. In St Patricks College it is signified that the poet has been at his school â€Å"for eight years† however he has still formed no sense of belonging. This connects with the relationship that Amir has with his father, Baba. Baba has raised Amir on his own for almost a decade however Amir feels as though Baba does not love him causing him to feel an insignificant amount of belonging

AP World History, How to write CCOT Essay

The spread of Buddhism and development of Neo-Confucianism represented cultural changes in China. Buddhist monasteries gained political and economic influence through acting as advisors to rulers and through generous grants of land. Empress Wu, a ruler during the Tang Dynasty, used Buddhist principles to rule and was considered a Bodhisattva by Buddhists. Pure Land Buddhism offered the promise of a better afterlife while Chen Buddhism emphasized meditation. The increased popularity of Buddhism in China was a result of the political and economic chaos following the decline of the Han. Buddhism was a salvation doctrine that offered succor to the poor and oppressed. Increasing numbers of sons in the gentry class dropped out of society and became monks, which led to an anti-Buddhist backlash during the Song period. Chinese leadership transitioned from the Han through the Tang. After the fall of the Han there was a period of disunity and chaos called the Three Kingdoms period. Eventually, the Sui asserted their rule, building the Grand Canal and invading Korea and Japan. When the Sui fell due to overexpansion, the Tang took power and established a cosmopolitan rule, extending Chinese territory over the Silk Road and integrating central Asian cultural elements such as Polo and wearing pants. The fall of the Han was caused primarily by pressure from outside invaders on China’s Northwest border – the Great Wall proved ineffective. The re-establishment of dynastic rule resulted from core Chinese values inherent in the Dynastic Cycle and Mandate of Heaven. The effects of the Fall of the Han and subsequent rise of the Sui and Tang Dynasties was cultural change as outside cultures influenced China, including the influence of Indian Buddhism and central-Asian nomadic culture. Confucianism was a cultural continuity throughout the time period. The Han had established the Confucian exam system although test-taking was limited to members of the elite. Under the Sui and Tang the examination system became an important way to establish merit-based government, and examinees were responsible for memorizing and analyzing the Confucian classics. Confucianism and later neo-Confucianism clearly defined the relationship between husband and wife, as evidenced in the â€Å"Three Submissions† women were supposed to obey. Even during the heyday of Buddhist influence, Confucian ideals about the family and roles in society influenced many or the elite and peasant class. Ultimately, Confucianism re-asserted itself in the form of Neo-Confucianism, which incorporated elements of Daoism and Buddhism, and Buddhist influence was squelched. As a result Buddhism is a tiny minority religion in China today, while Confucian values continued through later dynasties. Globally, salvation religions were spreading rapidly during this period as classical empires fell and insecurity became widespread. Christianity was similarly making headway Western Europe, as the collapse of the Roman Empire led to chaos and disruption.

Emotional intelligence (EI) Essay Example | Topics and Well Written Essays - 1000 words

Emotional intelligence (EI) - Essay Example Comprehending the differences between the two types of leaders is important for all the candidates of leadership and managerial positions. This paper will compare and contrast the transformational and the transactional leader, and explore the leader who connects with his followers more effectively. Discussion Contrast between transactional and transformation leaders The transactional leader is more concerned about maintaining the normal flow of work operations at the work place. On the other hand, the transformational leader extends his roles beyond those of managing the daily operations of the organization, to the levels of crafting the strategies of taking his team, department or company to the next level of success and performance (Hargis, Wyatt & Piotrowski, 2011). This difference is evident from the managerial outlook of the two leaders, because the transactional leader is often emphasizing the disciplinary structure determined by power to push for the completion of the tasks or the job roles available at the organization. The transformational leader is different from the transactional leader, through their managerial outlook, because they offer attention to the grouping of different employees, appealing to the personal zeal to perform and attending to the individual issues that can increase or affect performance (Kotlyar & Karakowsky, 2007). The second difference between the transactional and the transformational leader is that the transactional leader will often use a range of incentives to motivate the improvement of performance from his employees, but will often not pay attention to personal differences or preferences. On the other hand, the transformational leader will boost the performance of his employees through collaborating with employees, building strategic teams, motivating the workers and through appealing to the differences of different workers. Thirdly, the transactional leader equates giving more rewards to the increment of performance. In the case of the transformational leader, performance is boosted through the combination of incentives and setting higher goals for their subordinates, which pushes them to better performance (Hackman & Johnson, 2009). Fourthly, the transformational leader does not envision making his organization a market leader, but a transformational leader will offer his employees opportunities for professional and personal development so that they can push the organization to the level of a market leader. The similarities between transactional and transformational leaders The similarities between the transactional and the transformational leader are that both types of leaders manage to maintain the flow of operations and the completion of job tasks at their organizations. Through ensuring that the daily operations of an organization are met, the transactional leader keeps the organization afloat, while the transformational leader explores newer ways of improving performance. The second similarit y between transactional and transformational leaders is that they use incentives to motivate their employees so that they can perform better. Through the motivation of the subordinates, these two types of leaders are able to cultivate higher performance and to push the organization to higher levels of success, irrespective of the fact that their vision about the future of the organization is not

Open innovation is a phenomenon in search of a theory. (Birkinshaw) Essay

Open innovation is a phenomenon in search of a theory. (Birkinshaw). Critically evaluate this statement, examining current aca - Essay Example Can open innovation be introduced at McDonalds at the fry cook level, or is it only feasible among people with Ph. Ds? Does every individual personality work with open innovation, or are some personality types more effective under closed system? Might open and closed be points on a continuum that should be shifted for different circumstances? Might there be hybrid approaches, such as beginning a project using open innovation and finishing it using closed? How can open innovation be balanced against the needs of management? Does open innovation reduce or increase transparency? Many of these questions have been answered only summarily, some not at all, and some might be in principle beyond the present ability to answer. Yet theory guides research just as research guides theory: Creating a theory of open innovation, however tentative and likely to change, could help to create hypotheses that could be tested, models that could be explored, and predictions that could be proven or disprove n. This paper advances a theory of open innovation that claims that open innovation is in fact a more specific case of a general balance between the costs and benefits of command and control, and that open innovation is from an organizational behavior and institutional theory perspective a shift to bottom-up practices; as such, it depends crucially on loyalty to the institution, involvement in decision-making, corporate culture, management avoiding chilling effects, and other factors. I identify open innovation as a solution to the intellectual property version of the tragedy of the commons problem and as the internal flipside of the open source movement. Open innovation will be defined for the purposes of this paper as â€Å"a paradigm that assumes that firms can and should use external ideas as well as internal ideas, and internal and external paths to market, as the firms look to advance their technology† (Chesbrough, 2003). Open innovation involves firms creating institut ional practices to reap the benefits of internal innovation, such as with â€Å"innovation time† initiatives, and external innovation. Open innovation is in essence the model of most universities. Within the university system, a researcher's data is owned by the university and/or by the companies or stakeholders that funded or initiated the study, yet they also retain some copyright and control. The information is made publicly accessible, either subsidized to be free or for a nominal fee, so that research can be facilitated. Researchers have tremendous latitude to experiment and investigate down their own lines of inquiry. Open innovation, then, alongside the parallel but distinct concept of open source, is an attempt to replicate the intellectual output of the university and of similar institutions that allow information to be more freely created and disseminated. Albert (2008) points out how antithetical this is to many traditional notions of corporate capitalism: The assu mption made is that companies both reap 100% of the benefit of communal intellectual property yet retain 100% in-house, which are contradictory assumptions. In practice, firms are faced with a difficult dilemma. Both internally and externally, they must control access to their information to remain competitive and prevent competitors from harming them, yet doing so reduces the net amount of innovation. Innovation depends on cross-referencing. Knowledge doesn't occur in a vacuum: If someone looks at a problem and can't be sure what

Stratgic managment task1 Essay Example | Topics and Well Written Essays - 1750 words

Stratgic managment task1 - Essay Example Based on a complete analysis of the company, the future direction mission and vision will be drawn out along with a strategic objectives and key strategies for the next three years. Overview of Company: Tiger Airways Australia has been developed to be an ultra – low cost airline. The company was started in 2007 and is a subsidiary of Singapore Airlines. The main office of the company is located at Melbourne and the secondary base of the company is at Adelaide Airport. The main competitors of the company include some well known airlines like JetStar, Virgin Blue, Qantas etc. The table below provides a clear view of the competition of the company. Airline Competitiveness Jetstar Airways Biggest and direct competition Virgin Blue Very High levels of competition Qantas Airways Very High levels of competition Singapore Airlines High levels of competition SilkAir Medium levels of competition AirAsia Medium levels of competition Philippine Airlines Low Levels of competition Malaysia Airlines Low Levels of competition Cathay Pacific Airways Low Levels of competition (Which Airline) The high levels of competition has led the company to share routes as well as destination with other competitors. The table below provides detailed understanding of the same. ... of the routes are shared (12 Routes) Almost 26% of the destinations are shared (25 Destinations) Philippine Airlines Almost 7% of the routes are shared (7 Routes) Malaysia Airlines Almost 6% of the routes are shared (6 Routes) Company Market Details: Tiger Airline has been in the industry for a relatively shorter period and the company has yet to build its brand name and image in the markets. However Tiger Airlines has been able to effectively develop a number of routs for itself. The company is strictly a point to point travel airline and hence the company does not provide range of services like baggage to other flights, or transfer of passengers (Joshua). However the company has been able to effectively reach out to a strong market in the past years. The diagram below provides a clear view of the route of the company. (Airline Route Maps) Tiger Airways Fleet Total Singapore 10 Australia 9 Total 19 (Tiger Airways) It is clear that Tiger has been able to effectively launch itself int o several routes. The next section will provide an overview of the company’s internal and external analysis. Here SWOT analysis and PEST analysis has been chosen for the company. SWOT Analysis: Strengths Ultra Low Cost airlines Wide range of routes available Excellent coverage of the South East Asian countries and Australia Weaknesses Too focused on the low costs Lack of proper service in terms of the services included in the price Incomplete or inaccurate processes Opportunities Recessionary period is an opportunity for the company to make the best of the travel of people Higher availability of technology Improved ecommerce website Threats Increasing number of negative reviews from customers Increasing facilities by other low cost airlines Increase or fluctuation in terms of the fuel

Gardners Art Through The Ages Essay Example | Topics and Well Written Essays - 1000 words

Gardners Art Through The Ages - Essay Example Most of the artistic works in the book try to show that those who requested some artistic works wanted to separate themselves from the poor. In our world today, human beings do everything to separate themselves from the poor and associate themselves with the rich. It is ironical that those who made some of the luxurious art works that cost a lot of money were poor. Those who managed to order artistic works were people who were wealthy. From the building of pope’s palace by pope Paul, it clearly shows that it is all about wealth. This is because he ordered a luxurious palace. Thus, from the beginning, human beings do things in order to separate themselves from the poor. Some even do things not because they like it but because they want to show to the world that they are wealthy. In the current era of civilization, it is also inevitable to talk about wealth and poverty. This is because there is increasing gap between the wealthy and the poor. Rich always do things that separate them from the poor. They will rather buy meal in an expensive hotel than mix with the poor in an ordinary hotel. Expensive cars, expensive mobile phones, expensive jewelry and other expensive materials aim at separating the rich from the poor. In the current civilization, it is evident that the poor have no place. All that people do in the current era of civilization closely relate with money.... He even hired Bramante, a renowned artist and architect, to design it. This portrays the theme of wealth. This is because Pope Julius did not want to portray Rome as poor, but rich, and that is why he aimed at beautifying Rome. He even went further to design his own tomb, which took a lot of artistic work. All this was because of wealth since wealth ensured that artistic works of such caliber went to completion (Gardner and Kleiner 259). Another artistic work is the construction of lavish palace called Palazzo Farnese by Michelangelo. This was after Pope Paul III requested its creation. This was a sophisticated design to match the standard of the pope. Pope wanted to make Rome a splendid place and that is why he sought architectural prowess from recognized artists. The palace was three-dimensional mass just to show how lavish it was. It also constituted overlapping pilasters just to make it lavish and sophisticated. This splendid artwork was the one that set the pace for Italian pala ce. This showed an extent people could go to make earth their heaven. It is evident from the description of this artwork that wealth played a crucial role. Wealth ensured that the beautiful pope palace reached its completion. Thus, this artistic work depicts theme of wealth and poverty. The other artistic work is the building of Villa Rotonda by Palladio. This artistic work involved constructing the building at the top of the hill. This aimed at providing a beautiful view. It contained four identical facades resembling the four compass planes. Each porch provided a different view. It closely resembled the roman ionic temple. This artwork is splendid in that it enables one to have different views of the

Case of Dell in Australia Essay Example | Topics and Well Written Essays - 1000 words

Case of Dell in Australia - Essay Example B2B and B2C become the main models used by companies to reach their target audiences nod meet customers demands (Bearden et al 2004). It seems likely that direct selling from the manufacturer will grow exponentially. Indeed, it is this very transferability of information which virtually guarantees the demise of traditional industry boundaries. Companies are increasingly finding that, if they combine their information assets with those of other companies, the combined information resource is considerably more useful to all sides: two and two, in this instance, can make a lot more than four. Put together a social security or tax database with another database of people who owe debts and you have a means of tracking individual debtors over long periods of time and collecting the debt from them when they finally have the money to repay it (a process is known as debt surveillance and already being offered by some companies) (Dedrick and Kraemer 2001). The corporate objectives of Dell are to make self-help more useful and easier to use, improve customer support and direct customer relationships. The clear and effective strategy allows a company to redefine itself — at all levels, from strategy to the operation of individual processes (Drejer, 2002). Dell, a company that is comparatively unconstrained by physical geography (a seller of services across the Internet, for example) can reconfigure its distribution to take advantage of the variances in domestic tax regimes at virtually no cost: it does not have any physical assets of any consequence that need to be relocated. For dell, its value chain can be seen as a series of interrelated functions within any organization that link its inputs (raw materials to a factory, inbound logistics to a retail outlet) to its outputs (outbound logistics, the sale of goods to customers), the virtual value chain refers to the value that can be generated by exploiting the information generat ed by any stage of this  process.

Reflection and Journal Article Review Essay Example | Topics and Well Written Essays - 750 words

Reflection and Journal Article Review - Essay Example Although one could appreciate the wonders and benefits these technological gadgets could accord the aged, the applicability of these technology solutions are mostly availed only in developed countries. These unique products are not globally accessed due to the prohibitive costs and the diversity in health care provided to the elderly according to cultural orientations. I was made aware of the crucial importance relegated by the older population in terms of maintaining independence despite their age. The statement that reveals that â€Å"seniors fear moving into a nursing home and losing their independence more than death† is astounding. The various products thought to provide the aged with independence is perceived as a way to replace a loved one or a family member who is supposed to provide the needed care. In eastern culture, older people are not sent to nursing homes but are retained in the nuclear household with a family member to attend to their holistic needs. The reason , apart from economic, is the cultural value for extended family ties and filial piety. The practice stems from Confucianism and has been defined as including â€Å"the responsibility of each person to respect their parents, obey them, take care of them as they age, advise parents, and of course to love them. Loving one’s parents and offering them respect is the spring from which other forms of filial piety flows. A relationship with parents must be centered on love and respect† (Conjecture, 2011, par. 2). Therefore, technology is not openly embraced to replace the love and care that would be accorded by family members in times of need of the elderly family member. Further, the issues that were presented as a consequence of greater reliance to technology, particularly the fact the seniors are always apprehensive to use or try out new products and systems, should be addressed. Otherwise, these unique products would be deemed useless if the target market, for which they are supposed to protect, secure and maintain in safe and in good health condition, would be compromised by inefficient and unsupportively erroneous application. The essence is the use of technology should not replace the delivery of health care services that only committed people could provide. Article Review from Peer Reviewed Journal Summary The article entitled written by Dr. Ronald Klatz and published in the Generations, Journal of the American Society on Aging in 2002 presented issues of discovering anti-aging medicine in response to the projected continued increase of the aging population. The author presented the official definition of anti-aging medicine as â€Å"a medical specialty founded on the application of advanced scientific and medical technologies for the early detection, prevention, treatment, and reversal of age-related dysfunction, disorders, and diseases† (Klatz, 2002, 1). The continued research on this field of endeavor was revealed to encompass five key areas, to wit: genetic engineering, cloning, nanotechnology, artificial organs, and nerve impulse continuity (Klatz, 2002, 2). The benefits are revealed to be pronounced and consistent with modern health care issues.\ Critique The article presents another technological breakthrough aimed to focus not only on according longevity in life span, but also in improving the quality of the elders’ lives. There were initial apprehensions on supporting this kind of medical and technological breakthrough in terms of determining the repercussions to health care in general. But as trends in the aging populat

Saudi arabia cultuer Essay Example | Topics and Well Written Essays - 500 words

Saudi arabia cultuer - Essay Example The government in Saudi Arabia is focusing on encouraging womens education, and putting controls and conditions that contribute to teach all the necessary matters in women’s life and the community things of these women (Al-Rasheed, 2010). There are two types of schools in the different levels of education; the first type is a private school, and the second type is a public school. There are also two systems to study at the university; the first system is full time study, and the second system is distance learning. 1. The aim of girls’ education is breeding true Muslim behavior to carry out its mission in life that assists girls in being successful housewives. This makes them to be an ideal wife and a good mother, and become prepared to do what fits to the innate as a teachers, nursing and doctors. . 2. The state manages girls education by providing the necessary resources as much as possible to accommodate all students that are able to study. It also gives students the opportunity to learn different types of education that are appropriate to the nature of women and cover the country needs. In Saudi Arabia, girl’s education has different challenges that are faced in the education movement. The educational process aimed at women has become a competitor to other countries in the world. According to the official statistics report, the number of girls schools exceeded the number of boys schools, while the numbers of girls’ students of public education were more than two million students in various stages of public education (Al-Rasheed, 2010). That figure is nearly close to the number of male student. The official statistics issued by the Ministry of Education in Saudi Arabia revealed that the number of parameters exceeded 250 thousand teachers in Saudi Arabia. This is an increase of 40 thousand teachers. This parameter is the number of male teachers in general education schools. These estimates shows that the rates of girls students was growing in

Examining Cell Phone Effects Essay Example for Free

Examining Cell Phone Effects Essay Kailla Schlimm’s article â€Å"The Effect of Cell Phones in Modern Society† addresses issues on how cell phones have altered modern day society. Schlimm’s article is mainly targeted towards children and teenagers. She begins by expressing the main point that some people rely on their cell phones for everything and gives reason of why this may be and list examples. Schlimm then extends her argument and tells how cell phones are used and what they are used for. Schlimm also confers how cell phones may be great, but they also can cause problems. After each problem is addressed, the reader may want to stop and think about the positive effects and negative effects of cell phones. Schlimm focuses on the many problems that cell phones can cause. In doing so, she reveals examples of danger and harm that they may cause. She begins by proposing explanations of how cell phones can be used improperly. For example, she say â€Å"Phones of the twenty-first century may be great at times, but at the same time the do cause a few problems. For instance, there are people who text and drive† (Schlimm). Schlimm then makes a reference to how this problem may add to the chance of getting into a car wreck even more than drinking alcohol and driving. She explains how this increases problems for the safety of the person texting, as well as all the other drivers. Not only does Schlimm address problems that occur while driving, she also approaches problems that are increasing in schools and homes. Schlimm declares, â€Å"Children are becoming distant for their parents because they are always on their phones focused on other less important thing.† After her statement she explains how some children admit to playing games during dinner, or even church. Also how students use their cell phones to text during school, and their cameras to cheat. She ventures on to acknowledge how these actions cause problems in relationships, families, and the workplace. Overall, Schlimm has her article formatted well. She addresses and lists the problems the have arose since cell phones have become a vital part of society. She provides reasoning and examples behind each statement made. She says, â€Å" Cell phones are basically miniature computers.† She adds that sooner or later there will be no need for computers at all. If this statement is true, it proves that cell phones have had an enormous effect on society and have taken over lives. Schlimm’s essay was effective in many ways. She has fully presented each statement without out-weighing the positives and negatives. . One thing Schlimm could have done differently is given herself more credibility to equal out the balance of the logical and facts and examples she expresses. She could have given an example of a positive time where she has used a call phone and a negative. This would have made the reader feel more inclined to believe that all of her statements are true. With all the facts she finishes by saying that cell phones can be very negative at times and may cause problems, but when they are used properly they may be a wonderful thing. Works Cited Schlimm, Kaila. â€Å"The Effects of Cell Phones in Modern Society.† The Talon. 11 November 2010. Web. 5 February 2012. http://www.elhstalon.net/features/2010/ 11/11/the-effects-of-cell-phones-in-modern-society/

Voluntary Involuntary And Non Voluntary Euthanasia Essay

Voluntary Involuntary And Non Voluntary Euthanasia Essay In 1995, the Australian Northern Territory was the first place in the world to legalise voluntary euthanasia under the Rights of the Terminally Ill Act 1995. The first person to voluntarily end their life on Sunday, 22 September 1996 was Bob Dent, a terminally ill patient with prostate cancer (Grey 1999, p.19). As a reaction to this law and Bob Dents death a Liberal Party backbencher, Kevin Andrews introduced the Euthanasia Laws Bill 1996 which being a Federal Act over road the Northern Territory Act making euthanasia illegal in all States and Territories of Australia. Nonetheless, the vast majority of Australians from doctors to philosophers support voluntary euthanasia. For example, Australian philosopher, Peter Singer, actively supports euthanasia in his book of Taking Life: Human while pro-euthanasia Doctor Phillip Nitschke assisted Bob Dent to die by a lethal injection. This essay explains what euthanasia is and discusses whether voluntary euthanasia should be a right of the terminally ill. Euthanasia means a gentle and easy death, (Oxford Dictionary of Phrase and Fable 2006) and it is usually used to refer to the induced death of those who are incurably ill and in great pain or distress in order to spare them further suffering or distress. It is often referred to as mercy killing. Singer (1993, p.175) classified euthanasia as voluntary, involuntary or non-voluntary. Involuntary euthanasia means without the consent of the person who dies even if they express a wish to live and is effectively murder even if the motives are to benefit the deceased. Non-voluntary euthanasia occurs where a persons mental age is or has always been that of an infant so that they have no capacity of express any preference to live or die such as when someone is severely disabled infant since birth or those who suffer severe brain damages after accidents and become permanently mentally disabled. Sometimes people in this situation are allowed to die by withdrawing medical services such as intensive care treatment. Voluntary euthanasia which is where a person consciously chooses an early death (Singer 1993, pp.175-177). This essay will only focus on ethical arguments as to whether voluntary euthanasia and non-voluntary should be legalised. One argument for euthanasia is the utilitarian principle which says that the lives of some people can be sacrificed for the benefit of others deemed more worthy of care. It has been said that When applying the utilitarian theory to the ethics of euthanasia, can it not be said that Self Deliverance for a competent terminally ill patient is an unselfish act (Maj 2002)? Utilitarianism is commonly expressed as the greatest good for the greatest number (Rohnann 1999, cited in Rich Butts 2005, p. 9). A moral theory is utilitarian if and only if it assesses rules in terms of nothing but their utility. Jeremy Bentham, invoked what he described as a fundamental axiom it is the greatest happiness of the greatest number that is the measure of right and wrong (Bentham 1823). Utilitarians theorise that there is the same ground for voluntary euthanasia as for non-voluntary euthanasia as death is the benefit for the person killed but is it possible to justify ending the life of a human being who lacks the capacity to consent in the same way as where people are capable of consenting, and do in fact consent (Singer 1993). Utilitarians consider that death will bring peace to the patient, family and friends and can be justified purely on the utilitarian grounds that a terminally ill person has lost the ability to pursue the intellectual or physical life they once had or has lost dignity by becoming dependent on others for fundamental needs such as going to the toilet. (Maj 2002). Something I can identify with having seen my once proud grandfather after a stroke having to wear a nappy. In my opinion for many once dignity and self sufficiency are lost death is a release. The strongest argument for active voluntary euthanasia is based on respect for individual autonomy or self governance. Autonomy is the belief that every person has the right to shape their own life through their choices which includes the right to choose the time and circumstances of their death and is expressed concerning basic human dignity (Grey 1999, p.21). The principle of autonomy is an expression Kants ideal that having ones own choice whether that choice is good or bad is of paramount importance for life. Kant believes that suggesting someone knows better than yourself in such a personal thing as death is a dubious paternalistic presumption (Grey 1999,p.21) in many ways similar to this current governments belief that they know best what you should see or read on the internet. J.S. Mill in his expression of the harm principle state: the only purpose for which power can be rightfully exercised over any member of a civilised community, against their will, is to prevent harm to others. His own good, either physical or moral, is not a sufficient warrant. (Grey 1999, p.21) Autonomy acknowledges an individuals sovereignty over all acts which only affect self on the basis that it is insupportable to have someone else choose the timing of ones own death. (Grey 1999,p.21). This is difficult to argue against since only in the most horrendous crimes do States now have the power to deprive a criminal of life yet involuntary euthanasia suggests they have the right to kill non criminals. However if a person chooses to die we should respect that wish. Peter Singer believes voluntary euthanasia is a matter of respecting a persons preference and overall well-being, welfare or interests in their particular circumstances such as when they are suffering from cancer. In Holland, a nationwide government survey found that Many patients want an assurance that their doctor will assist them to die should suffering become unbearable (Singer 1993). One argument for euthanasia which involves utilitarian theory is the need to reduce societys costs in an ever more crowded world by reducing the number of people needing intensive care. There are many arguments against euthanasia. The possibility of abuse is one of the most common arguments against euthanasia. Abuse may mean patents are pressured by families or medical facilities to agree to ending their own life. Family may want to see the suffering end but they may also want to see the inheritance now. Doctors may wish to free up scare medical resources for those they believe they can save and in fact hospitals make these sort of choices by withdrawing medical support for the terminally ill. Opponents argue that we can never be sure that a request to be killed is the result of a free and rational decision, particularly as they are likely to be suffering pain, very probably drugged and confused (Singer 1993). Depression is also an issue because it is a form of pressure from within. A depressed person is more likely to choose to take their own life whether or not they are terminally ill. Another argument against euthanasia is the level of protection required to ensure it is not misused will actually make it more painful. No one who is ill is going to want to face a barrage of questions and forms to choose death yet leaving the documentation to Doctors or Family or some other party leaves open the door to abuse. There is also the opening the floodgatesor Slippery Slope argument that if society accepts euthanasia as a universal right of competent terminally ill patients to decide their fate (Maj 2002) then how long will it be before society decides what should be done with the chronically ill, handicapped or simply old who no longer contribute but are a burden on society. The Catholic Church objects to euthanasia on religious grounds saying that the church opposes euthanasia as that life which God has bestowed on each one of us, can never be sacrificed for the sake of the good of self-determination as it contravenes the Thou shalt not kill commandment (Demarco 2003, p. 154).However, the church distinguishes euthanasia from decisions to forego aggressive medical treatment which are medical procedures which no longer correspond to the real situation of the patient, either because they are by now disproportionate to any expected results or because they impose an excessive burden on the patient and his family (Demarco 2003, p. 155). In conclusion, voluntary euthanasia may be seen as a way of giving respect to those who are in distress and paid and wish to leave life, family and friends with dignity. While there are arguments against voluntary euthanasia they are, apart from religious moral concerns, easily overcome by putting in place appropriate safeguards such as a number of independent witnesses who must ensure that the person who is contemplating euthanasia is fully aware of what they are doing and that there is no going back. Non-voluntary euthanasia is more difficult as no consent is possible but can be justified on the grounds that the benefit to society is larger than the detriment to the individual particularly if the individual is and has been so damaged that they cannot appreciate the life they live. Singer says in his book of Rethinking Life and Death We should say theyre alive but nonetheless their life is not viable. They are alive but that life is not worth living (Singer 1999)

Carbon And Alloying Steel Applications Engineering Essay

Carbon And Alloying Steel Applications Engineering Essay Carbon steels are one of the main categories of steel. Steel is divided into groups since it is an iron (Fe) alloy and therefore it may contain numerous concentrations of alloying elements such as chromium, molybdenum, nickel, manganese. Yet, the mechanical properties of steel are affected according to the carbon percentage in the metal. Groover, 2010) (Callister Jr, 2007). Carbon steel is an iron-based, malleable metal, usually containing less than 1% carbon but in some cases may contain up to 2.03% C (plain carbon steels), along with small percentages of silica, sulphur, phosphorus and manganese. (Carbon steel, 1994-2011). The carbon quantity in carbon steel alters the strength and ductility of the metal. By increasing the carbon, hardness and strength are increased whilst reducing ductility. Yet by doing so, brittleness is increased and welding abilities are reduced due to its affinity to form martensite. This is a kind of tug of war between the properties of the metal. Carbon steels are divided according to the different amounts of carbon content i.e. mainly into three main classes; Mild low carbon steel ( 0.16% 0.29% C . Having microstructures of pealite and ferrite) This category is also known as mild steel. They are very common and are widely used since they are quite cheap, easy to form and to work with. Having low carbon content, they are ductile and malleable but have a low tensile strength and do not repond to heat treatments, which would form matensite. Their density is of 7.85g/cm^3 and youngs modulus of 210.000MPa. Surface treatment such as carburizing is performed when large amounts of steel requiring increased surface hardening. To further this strength, this steel is cold worked. Such applications identified as structural steel are used in buildings, where the right weldability, formability, combined with improved strength and resistance fracture, through surface treatment are required. (Types of Carbon steel ) http://www.construction53.com/wp-content/uploads/2011/04/steel.jpg Cross-sections of structural beams made of low carbon steels. Medium Carbon steels (0.3% 0.59% C. Microstructures of tempered martensite) Such steel, having a higher percentage carbon, increases hardness, brittleness and strength at the same time still being ductile, although this is slightly reduced with machinability. This range of carbon is achieved by austenitizing, quenching (i.e. rapid cooling from the outer surface to the inner) and tempering to create consistent tensile strength within the steel (referred to as Martensite) throughout the body. An application of medium carbon steel includes crankshafts since ductility allows it to retain the tensile strength required. Axle shafts and gearing plates are also made from medium-carbon steel (The uses for medium carbon steel, 1999-2012) (Tata steel Europe) http://www.gutenberg.org/files/38415/38415-h/images/fig_032.jpg http://traxxas.com/sites/default/files/gear.jpg Crankshaft side and an end view together with a gear which are made of medium carbon steel High carbon steel (0.6% 1.4% C) These are the hardest and strongest of carbon steels and therefore the least ductile. They are ideal for hardening and tempering condition and have good wear resistance. Hardness may be improved by further adding chromium, vanadium, tungsten, and molybdenum to carbon. An ideal application would be a sharp cutting tool such as scissors or a high strength spring which is required to withstand heavy loads. If welded, heat treatment is further required to keep the same mechanical properties. Higher percentage carbon in such steels may also be present in two other classes which are part of the high carbon steels; (Types of Carbon steel ) (Groover, 2010) http://www.parktool.com/uploads/thumbnails/uploads/products/a6945e129e29a7c9064c6136dbde619eb850b49b_800x700.jpg http://www.knifeworks.com/images/products/detail/TPDART002.1.jpg Higher carbon steels (03%- 1.7% C) Sulphur and manganese are also present to improve hardness which is ideal for cutting tools such as punches, milling machine cutters, industrial knives. Ultra high Carbon steels (1% 2% C) These large amounts of carbon are required for special cases, mainly non-industrial tools and are produced using powder metallurgy. These are at the limit of mild steel since above 2% carbon steel is said to be cast iron. (The uses for medium carbon steel, 1999-2012) (Callister Jr, 2007) http://web.tradekorea.com/upload_file2/sell/60/S00049660/Indexable_Drill.JPG Typical applications where such steels are utilised are drilling tools used for high speed drilling in substantial hard material. P7 One metal forming technique from the chosen industry; Since part of my previous assignment involved the automotive industry, I decided to further extend my knowledge on this subject and research on a very important forming technique, which is becoming even more used in this industry. The technique, I researched is the hydro-forming technique and the metals involved were steel and aluminium metals Nowadays vehicles are designed to operate as fuel efficient as possible yet without sacrificing on speed. These two factors though contradictory have something in common, weight reduction. To attain this, vehicles are continuously shredded from their weight and this is mainly done by using lighter metals and thin grade panels. However such metal forming becomes quite difficult due to formability and elongation problems. For this reason, hydro-forming technique is used where a sheet metal part is formed under water pressure generated by a punch drawing the sheet in a pressurized water chamber. This increases formability and it is mainly due to the water pressure which holds the material in place which is in turn punched in the forming process, shielding the panel from extreme thinning in critical areas. (Cass) (Altan, 2002) Sheet hydroforming diagram This technique can also be used to stretch form or deep draw metal. Other variations of the process are: Active hydro-forming-involves a process in which the blank is pressed against a die contour. Viscous pressure forming-where a viscous material is used instead of water to pressurize the medium Flex forming-water pressure used as an elastic polymer membrane that shields around the sheet and the punch. Adapting the Process (Altan, 2002) Here shown are the basic components making up the punch to carry out the hydro-forming technique. The upper binder or blankholder provide the holding force for the blank. The water chamber is used to hold the initial blank. Pressure chamber provides hydraulic counter pressure to the water. Hydraulic cylinders provide the force to the blank holder which in terms is controlled through a P.L.C controlling system. The water is then pumped in to the chamber below the die. This is controlled outwards from a relief valve. As seen above, we can easily observe the results of the panels produced in steel. The difference between steel and aluminium is that aluminium has 30%- 40% less elongation and formability. The answer to aluminium drawing was hydro-forming which has obtained results of 50% more depth than conventional drawing techniques. (Cass) Hydro-forming is on the increase in the automotive industry and nowadays, one can state that it is the most frequent used technique for all types of body-panels. However this process has its own limitations such as low manufacturing cycle times, highly specialised expensive heavy duty equipment which requires highly skilled operators. On the other hand, its under mentioned advantages are appealing; (Altan, 2002) Gives better drawing depths with better strain distribution. Draws complex shapes in one press cycle. Reduces die costs since one die is used. Finish is excellent. P8: Distinguish between fusion non-fusion welding processes. Select one fusion or non fusion and discuss the principles of operation, parameter of the process, the equipment used, advantages, disadvantages and precautions taken. Also describe one application for the process selected. Welding, still considered a recent metal working trade, is a process which involves two or more materials, which are required to be joined together at the surfaces in a strong enough bond not only mechanically (using rivets or bolts) but metallurgic ally (involving diffusion). This makes the bond secure and strong, eliminating the process of having to manufacture a new single part from scratch. To ensure that a good weld is formed, the surfaces to be welded must not have any asperities, meaning that any roughness, dirt and pointed ends must be removed to achieve the best weld possible. In order to overcome these difficulties, pressure, heat or both must be present in the process, which helps to bring atoms together and agitate more the microstructure of the materials so as to create a true secure bond. Cleanliness as already mentioned is essential and depending on the degree of dirt, one must utilise the appropriate cleaning tools. Generally, chemicals are used such as degreasers and solvents, which dissolve the oil or dirt, or else mechanically were abrasion, grinding etc, are used for rougher surfaces to attain the best smooth layers possible. (Groover, 2010) (Callister Jr, 2007) Since different materials with a vast number of properties and features may require welding, various types of welding exist on the market, each with their own characteristics and methods, differing in the apparatus, temperature and pressure used, type of gas involved ( acting as a shield) when another metal may be present. These welding methods are generally divided into two groups, non-fusion welding and fusion welding. Non-Fusion Welding: This type of welding can also be called solid-state welding involving bonding of materials without melting the base metals and no filler material is added. Non-fusion welding involves some of the oldest welding processes and some of the very latest. Also in such cases, pressure or temperature or both can be used to build up sufficient energy to bond the intended surfaces intended to be welded. The most important factors for a successful solid-state weld are that the two surfaces must be very clean and they must be very close to each other to allow atomic bonding. As no melting is involved, non-fusion welding has quite a few advantages over fusion welding. No melting means that there is no heat-affected zone; the metals surrounding the joint retain their original properties. Most of the processes producing welded joints affect the entire contact point between the two parts, instead of a distinct point like most fusion-welding operations. Adding to this, at times some of these processe s are used to bond dissimilar metals and it is important to note that these, if melted and re-solidified, may alter their relative thermal expansions, conductivities, and other properties which are very important when applied to a factual application. The drawbacks on the other hand for such welding process when, compared with conventional fusion welding, are that since the welding cycles take more time to complete, it is a more time consuming process and quite unsuitable for restricted sized parts. It is again important to note that surface preparation is essential before actual welding takes place for the surfaces to bond precisely. Yet the major disadvantage of this process is the relatively high initial investments cost in equipment. (Groover, 2010) (Schmid, 2010) Typical examples of non-fusion welding processes include; Diffusion welding (DFW). Pressure is used to hold two surfaces together at a high temperature where the parts bond by solid-state diffusion. Friction welding (FRW). Bonding is achieved creating heat created from friction between two surfaces. Ultrasonic welding (USW). Two parts with an oscillating motion from an ultrasonic frequency at moderate pressure is used in a direction parallel to the contacting surfaces. This combination of normal and vibratory forces gives shear stresses that removes surface films and achieves atomic bonding at the surface. Fusion Welding: This type of welding technique is also known as liquid-state welding and as the name implies, the base metals for this process are melted using heat. In most fusion welding operations, a filler metal is included in the molten pool where the bond is desired. These may be in the form of consumable electrodes or a wire fed into the weld pool. Their main purpose is to improve and ease the process to produce a much stronger weld in terms of metallurgy (atoms are packed closer together creating a much tighter mechanically bond). As a protection against oxidisation, these processes also include a protective layer between the air around the weld and the molten metal. These can be either in the form of a gas shield or as a type of  flux  which melts to produce a layer on the weld itself that solidifies and is removed afterwards.   Fusion processes where no external metal is used are known to be autogenous welds. Advantages offered from fusion welding, makes it the most common and most v ast of the welding processes which are mainly the ability to repeat the weld at the same joint without difficulty, which is relatively fast and adequate for most applications. As for the drawbacks, there are two main problems. The changes in the microstructure after repeated heating and rapid cooling could easily alter the properties of the parent metals and the effects of the residual stresses which build up in the parent metals caused by expansion or contraction. These have a long term effect on the weld itself due to the fatigue produces. The following are the main types of welding processes; Gas welding Oxyacetylene Welding (OAW) Arc Welding Shielded metal arc welded (SMAW) Gas tungsten arc welding (GTAW) Plasma arc welding (PAW) Gas- metal arc welding (GMAW) Flux cored arc welding (FCAW) Submerged arc welding (SAW) Electro-slag welding (ESW) High energy beam welding- Electron beam welding (EBW) Laser beam welding (LBW) (Kou, 2003), (Callister Jr, 2007), (Jha) __________________________________________________________________________________ Gas Metal Arc Welding; This welding process is a fusion welding process and uses the basics of this type of welding, since it melts the metals at the joining area, using elevated temperatures whilst creating an arc between a continuous fed filler wire electrode and the metals to be joined. The weld is constantly shielded using an inert gas. The type of gas used, differs from application to application. Inert (argon gas for example), is used for MIG welding. Other shielding gases used are carbon dioxide, as well as inert/active gas. Mixtures at times are used mainly to weld mild steel alloys (a mixture may be used from argon, carbon dioxide and oxygen). The ideal gas used for shielding, inert or active, is usually chosen according to the alloy composition and the grade of finish desired. Metal Inert Gas welding (MAGS MIG); Another gas-metal arc welding process is the metal inert gas process commonly known as MIG. In common with the  tungsten inert gas  process (TIG), MIG welding uses a protective gas shield layer over the weld pool projected using a torch shroud. MIG uses electricity to melt and create the welding pool that joins pieces of metal together. It may also be referred to as the hot glue gun and is known to be one of the easiest welding processes to learn. It was developed in the 1940s and even nowadays, it still uses the same principles. The electrical current used to melt the metals is used to create a short circuit between a continuous wire fed through a gun to act as the anode and the cathode being the metal being welded. This short circuit which dissipates enough (approx. 4000 F to 6000 F) heat to melt the metal and the non reactive gas, shields the weld being produced. With the metal molten, the two surfaces fuse together becoming one piece and as the heat is removed, the metal cool s, solidifying in a unite piece of metal. Being an easy to learn welding process, makes this application popular and moreover, since it can be used with a variety of materials: carbon steel, stainless steel, aluminium, magnesium, copper, nickel, silicon bronze and other alloys. http://www.personal.psu.edu/jhk5143/edesgn100/project4/welding/pic3.jpg MIG welder equipment A MIG welder is made up of several parts: The welder; Here the main equipment is the wire and a series of rollers which are used to push the wire out from the welding gun. The large spool of wire is held on with a tension nut. The welding gun; http://www.personal.psu.edu/jhk5143/edesgn100/project4/welding/pic2.jpg http://www.weldguru.com/images/300px-MIG_cut-away.jpg The most important part takes place. The gun (1) is made up of a trigger that controls the wire feed and the flow of electricity. Here, the wire is passed through a replaceable copper tip (3). Tips vary in size according to the diameter of the wire (5). The outside of the tip of gun is covered by a ceramic (2) or metal cup which is used to protect the electrode (4) and gives direction to the flow of gas. The Ground Clamp; this is basically the cathode (-) in the circuit, which is clamped directly to the piece of metal being welding. Good contact is essential on the bare metal. http://cdn.instructables.com/FKB/OD1H/F2FRVLCD/FKBOD1HF2FRVLCD.MEDIUM.jpg Advantages of MIG welding; Versatile in the sense that, it welds a wide range of metals and thicknesses, Will weld in any angle and position, Less cleaning is required, Has a good weld bead, Does not splatter the weld, Long welds can be done without starts and stops, Easy to learn. Disadvantages of MIG welding; It involves bulky equipment,since the gas source is transported in cylinders Produces a rougher and less controlled weld compared to TIG welding. Requires Irregular wire feed, Porosity and burn-back weld finish, Unstable arc, Heavily oxidized weld deposits, Difficulty in starting the weld on certain material. Precautions; At first hand, the most important precautions are those regarding the health and safety aspect. Welding involves heat, which may cause fire leading to accidents and injuries. Therefore, safety gear is essential. These include gloves, apron, welding helmet (to protect your eyes from the bright light produced by the electrical current) and a handy fire extinguisher. http://cdn.instructables.com/F71/ZGBA/F2L4FTRQ/F71ZGBAF2L4FTRQ.LARGE.jpg http://cdn.instructables.com/FBU/2A3K/F2NOBQVK/FBU2A3KF2NOBQVK.MEDIUM.jpg Bright light whilst welding Safety gear Other important precautions/defects must be taken during the actual process itself. Whilst welding, one might find that holes are produced in the weld, this might be due to too much current which might occur due to over-melting of material. This is resolved by reducing the current load from the welder apparatus. Spurts might also form on the weld. This is due to the wire speed or power settings regulated being too low. What happens is that the gun would be feeding in too much wire which whilst melting would splatter the weld without forming a proper one. A good weld will be achieved when all the settings are properly set resulting in a smooth weld. It should be noted that the sound of a continuous spark indicates the proper quality of the weld. MIG (Fusion) Welding for Aluminium and Its Alloys: Aluminium welding is regarded as a very difficult procedure due its low melting point yet high heat conductivity and which could result in poor penetration and molten holes. Aluminium being a non ferrous metal, is readily available in various product forms. In order to establish a proper welding procedure, it is essential to know the material properties of the aluminium alloy being welded. These can be effected by;   Aluminium Oxide Coating   Thermal Conductivity   Thermal Expansion Coefficient   Melting Characteristics In normal circumstances, aluminium is welded using TIG and not MIG welding, since it is far more difficult to weld aluminium with the latter. On the other hand, aluminium being a soft metal, requires that the TIG welder has to utilise AC current not just DC current (this is because intermediate welds are required to bond aluminium) and therefore modifications have to be made on the TIG welding equipment, making it more costly then ever. However though it is considered difficult (especially for an inexperienced worker), the majority of such welding is carried out utilising MIG welding with possible reasonable results, if the following procedures are noted: Essential features to weld aluminium using MIG welding: Base-metal preparation:   aluminium oxide and hydrocarbon contamination must be removed Aluminium oxide melts at 3,700 F while the base-material aluminium underneath will melt at 1,200 F. Preheating: Preheating the aluminium work piece can help avoid weld cracking Preheating temperature should not exceed 230 F The push technique:   pushing the gun away from the weld pool rather than pulling it, will result in better cleaning action Travel speed:   Aluminium welds need to be hot and fast High thermal conductivity of aluminium implies the need for higher amps and voltage settings and higher weld-travel speeds If travel speed is too slow, the weld risks excessive burn Shielding gas:   Argon, which gives good cleaning action and penetration profile, is the most common shielding gas used when welding aluminium Welding wire:   Aluminium filler wire that has a melting temperature similar to the base material is ideal. 0.035-inch diameter at a low wire-feed speed 100 to 300 in. /min Convex-shaped welds:   Aluminium welding causes crater cracking resulting in failure. These are created due to the high rate of thermal expansion of aluminium. Power-source selection:   Welding current in excess of 350 A, cc produces optimum results.   Wire feeder:   A constant-torque, variable-speed motor in the wire-feed is essential giving constant force and speed through the gun. A high-torque motor in the welding gun pulls the wire through and keeps wire-feed speed and arc length consistent.   Welding guns:   contact tip approximately 0.015 inch larger than the diameter of the filler metal being, When the welding current exceeds 200 A, a water-cooled gun is used to minimize heat build-up and reduce wire-feeding difficulties.

I am a Wimp :: Personal Narrative Essay Example

I am a Wimp I am sitting alone on the "N" train. I am in my usual spot: back car, second floor, first window seat. It is cold inside. It is wet outside. I'm tired. My thoughts are playing themselves out in-between the lyrics on my walk-man. For Friday, I am mellow. The two sides of my personality are trying to communicate, and I have decided to simply sit down and listen to the conversation. My weekday self goes to high school in Manhattan. I am often tired and try simply to get through the day. I usually do not have fun during the week. I like my friends, but there is no time to have a good time together. I feel inadequate at my high school. Many students do just as much work as I do and make it look easy. My "week" self is often frustrated. In comparison, my weekend self is rested and happy. I leisurely groom myself in the morning. My weekend friends are impressed that I travel so far to get to school. They are impressed that I get good grades. But overall they are impressed that I am allowed to leave for lunch and that I actually go back to classes. My weekend self buys into the hype, and is very proud. I realize part of the equation is location. My weekday self spends its days on Madison Avenue, while my weekend self spends its days in Queens. Even though I have lived my entire life in this neighborhood I have always felt a little out of place. It's a tough neighborhood and I'm not afraid to say I am a wimp. I enjoy the freedoms of the Upper East Side. The only attitude I receive is from rich women who wish teenagers would stop crowding their streets and talking too loudly. If I give someone a look, I am not afraid they are going to follow me or "jump" me. The kids in my neighborhood rarely finish school. Most go to an alternative high school or get their G.E.D. after dropping out. They eventually get decent jobs, but few receive college educations. In the end, few adults in my neighborhood enjoy their jobs. I fear this will happen to most of my weekend friends. Location also affects my identity in other ways. I am a Wimp :: Personal Narrative Essay Example I am a Wimp I am sitting alone on the "N" train. I am in my usual spot: back car, second floor, first window seat. It is cold inside. It is wet outside. I'm tired. My thoughts are playing themselves out in-between the lyrics on my walk-man. For Friday, I am mellow. The two sides of my personality are trying to communicate, and I have decided to simply sit down and listen to the conversation. My weekday self goes to high school in Manhattan. I am often tired and try simply to get through the day. I usually do not have fun during the week. I like my friends, but there is no time to have a good time together. I feel inadequate at my high school. Many students do just as much work as I do and make it look easy. My "week" self is often frustrated. In comparison, my weekend self is rested and happy. I leisurely groom myself in the morning. My weekend friends are impressed that I travel so far to get to school. They are impressed that I get good grades. But overall they are impressed that I am allowed to leave for lunch and that I actually go back to classes. My weekend self buys into the hype, and is very proud. I realize part of the equation is location. My weekday self spends its days on Madison Avenue, while my weekend self spends its days in Queens. Even though I have lived my entire life in this neighborhood I have always felt a little out of place. It's a tough neighborhood and I'm not afraid to say I am a wimp. I enjoy the freedoms of the Upper East Side. The only attitude I receive is from rich women who wish teenagers would stop crowding their streets and talking too loudly. If I give someone a look, I am not afraid they are going to follow me or "jump" me. The kids in my neighborhood rarely finish school. Most go to an alternative high school or get their G.E.D. after dropping out. They eventually get decent jobs, but few receive college educations. In the end, few adults in my neighborhood enjoy their jobs. I fear this will happen to most of my weekend friends. Location also affects my identity in other ways.

Cousin Marshall and the Role of Responsibility, Charity, and Suffering

‘Cousin Marshall’ and the Role of Responsibility, Charity, and Suffering Harriet Martineau, in her story â€Å"Cousin Marshall,† addressed the separate spheres of work and responsibility between a husband and wife in the figures of the Mrs. Bell and Mrs. Marshall. Martineau intended the story to act as a lesson to her readers and this is reflected in the dualistic portrayal of the two women. Cousin Marshall is portrayed as the height of womanly responsibility and suffering while Mrs. Bell is portrayed as a blight on society. Martineau assigned the financial management of the household to women. While she did indicate that it was the husband’s role to bring in wages, it was the wife who was responsible for maintaining and managing the expenses of the household. Mrs. Bell turns away her sister’s children after their mother dies saying â€Å"don’t expect me to put any such dead weight on my husband’s neck† (Martineau 11). Marshall objects with the fact that Bell’s â€Å"husband earns better wages than [hers]† (11). In this exchange, Martineau places the decision within the context of the respective families’ financial concerns. The issue of charity arises in Marshall’s discussion with Mrs. Bell. â€Å"You have found the gentry very kind to you this year; so much so that I think the least you can do is to keep these children from being a burden on the rates† (Martineau 12). The particular phrasing that Martineau selects here is of particular interest. Her objection is not one of sympathy for the children but to prevent them from â€Å"being a burden on the rates† (12). If sent to the workhouse, Martineau argued, it would fall upon the state to support the children, raising the rates that good, hardworking people pay, often to their... ...dissolute to mock at those who prize independence, and who bind themselves to self-denial that they may practice charity. (129) Thus, it is the woman’s responsibility not only to live responsibly, but live by example in a role of quiet victimization. Martineau clearly had a strong political agenda in writing this story, however in doing so, she addresses the fundamental difference she sees in the roles of responsibility in marriage. In her mind, the husband and the wife have clearly defined roles, not so much along lines of production, but rather in terms of the household. That which is in the household, whether it is the domestic duties or financial responsibility, falls to the wife while it is the husband who is responsible for the income stream. Work Cited Martineau, H. Illustrations of Political Economy No. VIII. London: Charles Fox, 1832.

Essay --

What is the Better Purchase: LCD TV or Plasma TV? We live in a world of choice. In each moment, we are presented with the opportunity to choose from an array of options. The truth is, though, that we do not always make our choices consciously. Sometimes, instead of choosing what is best for our personal requirements, we fall in the trap of commercial tricks and purchase a product we do not need. When we want to make a choice based on facts and objective reasoning exclusively, we need to methodically analyze and compare each product based on the criteria that we value. In this essay, I will try to do just that when choosing between the two most popular types of TV’s – LCD and plasma. When entering the technical department of any supermarket or a high-tech store, many people ask themselves whether a LCD TV is better than a plasma TV or vice versa. To answer this question, we need to compare the two products based on several relevant technical criteria. From a layman’s eye, LCD and plasma TVs may look alike; however, a keen eye will notice the difference between these sets. These differences permit customers to have a manifold of choices based on their particular requirements. A plasma display comprises of two glass panels packed in compartmentalized spaces, with many small plasma cells. Plasma cells are normally charged to a precise electrical voltage level (Kith, Plasma TV Components). On the other hand, an LCD display is comprised of aqueous crystals that are normally preset between two panels of glass (Reed, Architecture of the TV). Displays are further enhanced by utilizing electricity voltage on the LCD TV set panel. As a result of such technical differences, a conclusion can be drawn that plasma TV sets are better in comp... ...y suit a hi-tech apartment of a young business person. Consumers should remember a couple of basic tips when choosing one type of TV over the other. For instance, if you want to fit a TV set into a huge space, then a plasma TV will do better due to the wider viewing angle and the lower price of big sizes. The debate about which TV set is better is far from over. In the end, the question lies more in the hands of the consumer. Next time you buy a plasma or LCD TV set, do not be surprised if your neighbor criticizes your choice. References: 1. Kith, Hendrick. Plasma TV Components. Hallwork Publishing. 2011. 2. Reed, Melanie. Architecture of the TV. Limpon Press. 2008. 3. Howard, Sarah. TV Comparisons: Modern. Francis Publishing. 2009. 4. Fields, Garry. Price Comparisons of Viewing. The Atlantis Times. 2012. 5. Franz, Liam. TV Statistics. The Seattle Daily. 2013.

Childhood memories Essay

The purpose of this essay it to analyze the childhood memories of both Judith Ortiz Cofer and Anwar Accawi past from their stories, the silent dancing and the telephone respectively, who both have complicated early childhood memories. Accawi’s childhood memories are about the changes that were brought by the telephone which led to people moving from the village for opportunities away to make money. He is remorseful for this telephone technology since before it came, people were happy but in his adulthood, he claims that in his adult life he has not been able to find a â€Å"Better Life† than the life in Magadaluna. Accawi’s narrative is created on an adult perspective of regret and humor. He vividly remembers the village destruction as he realizes that the cruelty and idyllic coexist as the human being embodies them. Silent dancing is a story of Cofer in her elementary school through to her high school as they migrated from America to Puerto Rica and vice versa, it discusses the means through which the culture, gender, class and race shape her life without Cofer sounding naive or dogmatic. Her childhood memories are about the depression and discrimination in America due to their color and one day hoped that she would win some respect for her culture and herself. She puts it that â€Å"If you were to stretch that rubbery face, you could find my father’s face and deep within that face- my own† the differences in their childhood memories is that Cofer’s bitter memories are contributed by their movement from their native land in Puerto Rica to America where they face racial discrimination whereas the Accawi’s bitter childhood memories are caused by introduction of the telephone technology that is brought in to Magdaluna that ends up transforming the life of the natives. Another difference in both stories is that Accawi is against the changes that occurred due to technology and wishes that they never occurred while Cofer hopes that things will change in America where she and her culture will be recognized. The village of Magdaluna is simple with no new technology. There are no even calendars and people tell about certain times through extraordinary occurrences like earthquakes and birth of certain people. The children did odd jobs for the adults to earn little money and Accawi was very contented with this way of life. Accawi was happy and assumed that everybody else was happy too without the advantages of the technology. After the coming of the telephone, the way of life of the village of Magdaluna changed since people began to worship the phone. The villagers would gather around the phone waiting for any news and for job opportunities. As time passed by more people gathered around the telephone and more villagers emigrated from Magdaluna and this irritated some villagers like Accawi. .Judith Ortiz Cofer recounts the experiences of her upbringing in a chain of chronologically arranged vignettes that details her way of life as a little girl shuttled forth and back between her grandma’s casa in Puerto Rican village and the family’s American home at Paterson in New Jersey. Ortiz Cofer’s father worked in the United States Navy shipyards of Brooklyn Yard, a profession that required him to abandon his family for several months at different time. Worried about the safety of his family and mindful of his companion’s regular longing for the island, he regularly sends his wife (companion) and offspring to their local land located in Puerto Rico regularly. The narrative explains the life of Cofer as she grew against the cultural switch backs. Her past childhood memories involve the sadness, racial discrimination and depression in America where they lived in El Building which hosted many foreigners but they could not interact but it is the â€Å"But the pipes were also a connection to all the other lives being lived around us† and her mother â€Å"had been given strict orders by my father to keep the doors locked, the noise down, ourselves to ourselves†. She remembers a certain moment when her father was referred to as a Cuban but when he said that he was a Puerto Rican the other responded by shouting to Cofer’s father â€Å"same shit†. Cofer’s home life anchored her to the Puerto Rico’s past while the US remained her home. The sad childhood memories are passed from generation to generation in what is said to be the â€Å"Rubbery face† and Cofer hopes that the misery will end. At home she was a Spanish while outside home she spoke in English and she was always told that she sounded like a â€Å"gringa†. One of the mentors for this lady is her grandmother who is also very strict. Both childhood experiences are greatly contributed by their grandparents. Both stories show the reader how the present culture evolved. Cofer’s stories shows how the American culture is a product of many other cultures while Accawi’s story shows how western civilization changed the farming village at Magdaluna in Lebanese.

Mcdonalds Company Facts Essay

  Explain the purpose of the business. * Does the company operate on a profit or non-profit basis? Explain your answer with details. * Does the company provide a service; manufacture a product, internet based or perhaps all? * Where is the business located and how many locations are there? McDonalds’s provides a service of fast food to people all over the world. The top 5 are America, Japan, Canada, United Kingdom, and Germany. According to 2007 statistics, McDonald’s serves more than 27 million individuals daily. Headquarters are located in Oak Brook, Illinois. It is both a profit and non-profit orientated business. Jim Skinner, the CEO, owns 33,000 restaurants in 119 countries. 59% of McDonald’s restaurants are owned by independent people. McDonalds also invests into the stock market, with shareholders that receive dividends and money when he or she sells the stock. McDonalds supports non-profit organizations like, The Ronald McDonald house fund provides free housing for families with children that are hospitalized far away from home and grants to charities in need. B. Explore the history of the business * Provide a chronological history of the business indicating significant events during that history. In 1940, Dick and Mac McDonald opened a Bar-B-Que drive-in. Eight years later; the drive-in was shut down and turned into a 9 item self-serve drive-in. By 1958, McDonald’s was already a sought out place to eat and sold their 100 millionth hamburger. In 1967, they went international and opened a McDonalds in Canada and Puerto Rico. A year later, McDonalds created and started serving their famous Big Mac’s. McDonalds celebrated their 50th anniversary in 2005 and continue to serve Big Macs, happy meals, cafe specialties, and dollar menu items to millions every day. Ray Kroc can be thanked for McDonald’s expansion. In 1955, he made McDonalds a corporation and 5 years later bought McDonalds rights. He was able to build McDonald’s in to a top franchise fast food restaurant. C. Discuss how the capitalism’s four basic rights are illustrated in the operations of this business. * What form of economic environment does this company operate (ex: monopolistic competition versus oligopoly, etc. ) McDonalds operates in a monopolistic competition. There are 2,400 McDonald’s franchises. With 80% of the businesses being franchised (McDonalds). This means that McDonalds does sell to private owners and are practicing this right. They are in competition with all fast food restaurants, like Wendy’s and Burger King. But McDonalds also has to compete against real restaurants and home-cooked meals. According to QRS magazine, McDonalds is the top fast-food business in America (QRS magazine) so they are having no problem competing or making profit’s. McDonalds uses the freedom of choice by adding specialty coffees and shakes to the menu, along with premium salads and a few other products. D. What role does the government play in the operations of the business? McDonalds has to follow all Occupational Safety and Health Administration (OSHA) regulations. This means that they have to make sure all floors and walkways are clean and free of clutter. McDonalds has to post all OSHA safety signs and allow breaks for employees. OSHA also has regulations on the minimum wage an employer can pay an employee. Currently, the wage is $7. 25 (OSHA). In 2011, a health law was passed that now requires McDonalds to post all data on calories in their food. This has caused McDonalds to rethink some of their items and make them healthy. An example of this would be with kid’s happy meals that can now substitute french fries or pop for apples or milk. Internationally, the United Kingdom has a Children’s Food Bill intended to highly regulate the advertising of happy meals and fast food aimed at children (Wikipedia). McDonalds has to be careful not to rope kids in to wanting unhealthy food. E. Describe the legal form of the business and indicate some of the advantages/disadvantages of the form. McDonalds is an S corporation. Most advantages of an S corporation are received by shareholders and employees that are shareholders. Some advantages of an S corporation are better legal protection and a reduction in payroll and employment taxes. Some disadvantages are accounting, tax preparation and payroll process can be a burden and it costs more than a partnership or proprietorship to start and stop (Nelson). F. How does this business exhibit corporate citizenship and responsibility of business in society? * Describe any â€Å"green† concepts the business might be using or plan on using in the future. McDonalds has a Ronald McDonald House Charity donation box in most of their restaurants. This makes it easy for customers to donate their spare change/money to a good cause. In July of 2011, the movie Smurf was released and McDonalds promoted it and themselves by teaming up with Keep America Beautiful (KAB) to invite kids to â€Å"Smurf the Earth† by choosing Apple Dippers in their Happy Meals. For each digital code featured on Apple Dipper packages and redeemed at HappyMeal. com, McDonald’s and KAB planted a tree in needed areas within national forests across the country. McDonald’s in Latin America also gave away a million sunflower packets so children could grow their own sunflowers. McDonald’s has been a national member of the U. S. Green Building Council (USGBC) since 2007. They have added more efficient lighting, plumbing, storm water management and even a garden in a McDonalds in Chicago, Illinois. McDonalds continues to strive to be greener. G. Discuss any career opportunities within the business. * What type of credentials are needed for a job with this company (example: type of degree/major), experience desired, and any current salary ranges. No experience is needed to work in McDonalds, but they do have a Hamburger University that teaches workers the key to achieving successful procedures, service, quality and cleanliness. The age of a person looking to work at McDonalds depends on the Child Labor Laws in the state. OSHA’s regulations are that no one under 16 can work with stoves, grills, or knifes. Wages vary from minimum wage to†¦ To become a manager at McDonalds, a worker must first complete the first level of the McDonald’s Management Development Program. Being a manager allows the worker to have flexible hours and gain long service awards.

Basic Economics.Which economic system is best suited for handling a crisis of epic proportions? Essay

Basic Economics Introduction Which economic system is best suited for handling a crisis of epic proportions?   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚     In the incidence of hazards, disasters, threats   as well as handling crisis’s of epic proportions   such as hurricanes, fires, blizzards and floods among others, employment of the Socialist system helps managements at all levels handle and manage such incidences . The system is systematic, proactive and guides departments at all levels of the government administration, NGOs, as well as the private sector to work as a team and handle such crisis regardless of the size, the intricacy, the source and the location (Kornai & Oxford University Press, 1992). Additionally, it provides a combination of assistance from different sectors.   In this case, the system helps reduce and sometimes prevent loss of life, the loss of property and environmental destructions from incidences of any level. Essentially, it provides a common approach in managing incidences. In this case, the socialism system plays a major role in offering solution s as the government pays everyone who works within the environments. As most disasters are local, the immediate community, the groups within the locality and the individuals within act as the first responders to a calamity hence application of the socialist system serves the best. This motivates individuals to assist and help the people in need. Most importantly, the socialist system is the most effective system in managing crisis as it teaches people within the society the importance of living together, sharing belongings and helping each other during the times of need. Why a socialist system might be the best in responding to the needs of people struck by an emergency like the earthquake that occurred in Haiti in January 2010? Socialist societies provide immediate solutions to offer urgent and controlled solutions to emergencies and more so disasters of epic proportions as the one suffered in Haiti in 2010. This is because the system has the ability to call for help on a larger scale since it strategizes on the mix of public, private and government owned operations(Marangos & Palgrave Connect (Online service), 2013).   The incidence of the earthquake that occurred in Haiti was so catastrophic such that it led to collapse of buildings that caused the deaths of thousands of people and left many injured without food and basic commodities(Marangos & Palgrave Connect (Online service), 2013) . Although the US government and the UN provided basic support and help in rescue and provision of basic commodities, the socialist system could have worked better. Socialist communities use the system to ensure a common base for the good of the nation and human needs and provide a common approach in providing a solution. The system enlightens the public to take the necessary measures as well as avoiding waiting the government to bring a solution by recognizing that each person has a role to play. It works well because it basis its endeavors in immediate regrouping and reorganization of efforts. Why it costs more to heat our homes in the winter?   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   In the laws of supply and demand, when the demand of products goes up, the price of the products typically goes up. In the event of the augmented costs of heating up our homes during the winter, the same law applies. For instance, since everyone in the market strives to purchase products for heating their homes, the demand shoots up hence the prices profoundly increase. Therefore, if demand increases and the supply remain unchanged, a shortage is established hence a higher equilibrium costs (Gottheil, 1998). In winter, the same applies as the energy supplies remains the same as the demand augments overwhelmingly an aspect that translates to elevated bills for customers. For instance, change in weather conditions serves as the major factor as to why clients pay more in terms of energy used during the winter. References Marangos, J., & Palgrave Connect (Online service). (2013). Consistency and viability of socialist    economic systems. New York NY: Palgrave Macmillan. Gottheil, F. M. (1998). Principles of economics. South-Western college publishing. Kornai, J., & Oxford University Press. (1992). The Socialist system: The political economy of   Ã‚  Ã‚  Ã‚  Ã‚   communism. Oxford: Clarendon Press.

Classroom Observation and Reflection Paper Essay

Curriculum Constr. and Assessment: Reading and Language Arts, I had the opportunity to not only observe but teach a lesson that I created for Mrs. Watson’s Class at Little Rascals Daycare and Afterschool Program. Throughout this paper I will reflect on my lesson plan experience. First, I introduced the concept of letter blends to the students. I explained to the students that letter blends can be at the beginning, middle, or end of a word to make specific sounds. I then explained to the students that I was going to be teaching them beginning letter blends. I went n to explain to the students that since there were several beginning letter blends that I chose five to teach about In the lesson. The blends that I chose were dr, n, bl, gl, and Ch. I went over each beginning letter blend, demonstrated the sound each make and provided several examples for each letter blend for the students. Next, I gave the students an opportunity to participate In the lesson. I held up picture flashcards that had different objects on them. The students had to raise their hands and tell me what the object was and the letter blend for that object. I repeated this process until ach student in the class had a chance to participate. Once we finished, I answered any questions or concerns the student had. I noticed that the students were actively engaged in the lesson and seemed to have really enjoyed. Most of all they seemed to have understood the lesson with ease. Lastly, the students were given a cut and paste blending worksheet to complete. The worksheet had 1 5 different picture objects and letter blends on it. The students had to color (if they wanted to), cut, and paste the correct picture to its letter blend. Once the students finished the worksheet we went over it as a class. Again, I answered any last questions or concerns and wrapped up the lesson. In conclusion, this was my very first time teaching a lesson. I have done several lesson plans before but never had to actually teach them. I believe the lesson went pretty good. The teacher and the students were both very welcoming and provided positive feedback. Although the lesson went well, the one thing I would change if I had to do it all over again would be to pick two or three blends at a time to teach instead of all five. Sometimes when a lot of information is thrown at the students it makes it harder to understand.

Presentation on Cost Coursework Example | Topics and Well Written Essays - 750 words

Presentation on Cost - Coursework Example Cost accounting information are mainly meant to permit the determination of unit costs and total product costs. Different organizations require different types of cost information. For instance, service organizations need cost information pertaining to the costs incurred for producing and providing services whereas manufacturing firms like Apple Inc, Coca Cola etc need information about costs incurred for manufacturing the products. Similarly, retail organizations need information about costs incurred for purchasing products for resale (Needles, Powers and Crosson, 2008, p. 808). These types of cost information are generally required by almost all the firms since they have multiple functions such as manufacturing, purchases and providing of services. Cost information is highly important for various managerial purposes such as ascertaining the actual costs, controlling the costs, determining the selling price, ascertaining the profitability and controlling on wastage. Similarly, cost information helps management provide a base for setting business policies, facilitate efficient information system and arrange internal auditing system. Cost information support various purposes such as planning, decision making, performing, evaluating and communicating (Needles, Powers and Crosson, 2008, p. 806). Financial management in both the manufacturing and service organizations use cost information to develop budgets, estimate income, manage total workforce and plan for the future. Cost information about product, process, function and financial transactions can help the management take managerial decision and plan for further activities and business functions. Managers in manufacturing companies use estimates of product costs in order to prepare budgets for labor, material, production and overhead costs. Another major purpose for cost information is performing by which managers find estimated cost of services with a view to mentor profitability and make decisions about vario us matters such as future business bidding, reducing negotiating expenses etc. With cost information, managers are able to predict gross margin, operating income and value of goods sold etc. This information are also useful for reducing selling prices and lowering selling prices for bulk purchases (Needles, Powers and Crosson, 2008, p. 806). Cost information supports managerial decision making, planning and performance. Planning for the future is primarily based on how costs are incurred now and how they will be in future. Planning is highly important for pricing and many other managerial decision making. Similarly, management can perform estimation, assessing, evaluation, cost control etc only if they gain sufficient information pertaining to costs of products, labor, materials, processing and so on. Cost Object A cost object is a business activity for which a separate cost measurement is desired (Drury, 2007, p. 28). More specifically, when management in an organization needs to k now the costs incurred for a specific activity, this activity is referred as cost object. The management may need to know the costs details of different activities such as purchasing, operating a machine, manufacturing a product, rendering service to

Bitcoins vs Money Essay Example | Topics and Well Written Essays - 1000 words

Bitcoins vs Money - Essay Example Bitcoin system is entirely dependent on internet platforms, which are readily available across the globe because of the technological advancement (Rotman 1). Using Bitcoin, the average income earners can easily transact beyond border transactions without incurring extra costs in physically moving to those places. This essay examines the use of Bitcoin and money as applied in the current system. Kudlow Larry downplays the rise in use of digital currency. He cites the rapid fluctuations in prices by hundreds of dollars in the space as a key challenge that emanates from digital currency use. He outlines an example of an individual who buys an item for $500 but after the retailer processes payment, the digital currency falls to $100 in value. He resolves that both sellers and buyers make associated losses because bitcoin is not a reliable medium of exchange with dependable store of value (Kudlow 1). On the contrary, money has a store of value. Its value does not fluctuate as rapidly and frequently as in the case of digital currency. Because Bitcoin has no store of value, economists prefer the money system to digital currency. Digital money use has no border restrictions. Making cross-border transactions is easier and simpler than in the case of money. Money system is more reliable and regular fluctuations in prices do not affect it. Digital currency use will therefore not pose a significant effect on money use. The reason for this is that money system posses superior features like security and reliability that the digital currency system lacks. There are viewpoint that the rising use of digital currency like bitcoin transactions will not pose a significant impact countries’ economic progress. According to Gaulio, bitcoin transactions are easily traceable to their initiators hence American government, for instance, will fully advocate its use. In a state controlled digital economy, the taxation units will

Business Expansion and Sustainability Research Paper - 1

Business Expansion and Sustainability - Research Paper Example The degree should be from a recognized university. Secondly, the applicants for the post should have an experience of not less than 3 years in the particular field required for the job position. Thirdly, the applicants should be registered with the professional bodies recognized by law and the government. Firstly, recruiting knowledgeable candidates who are conversant with the stated field will ease the placement of the recruits in the vacant positions. The job requirement of having a degree from a recognized university will make the staffing process easier in the placement stage. Also recruitment of qualified candidates ensures creates a pool of highly ranked employees in the organization and this improves the brand name of the company. As a result, the good brand name attracts more trained workers for the business operations (Bechet, 2008). Secondly, the previous work experience required from the candidates is essential in staffing since it enables selection of employees with of the right quality in terms of technical knowhow in the stated field. Additionally, the job requirement in previous work experience guarantees the organization little or no employee training in the future. In this way, the organization can be relieved from the costs spent in training and indeed direct it to other activities of the organization. The most effective strategy to ensure that the applicants meet the stated job requirements is by enquiring certificates and CVs from them. They should carry with them the academic certificates, work experience and registration documents from the professional bodies that are concerned with the particular field. In this way, you will screen the documents to ensure that there not forged, and, as a result select the applicants, which are just enough for the vacant position. A long-term recruitment plan that is in line with the company’s recruitment

Why do women belong in combat Research Paper Example | Topics and Well Written Essays - 1500 words

Why do women belong in combat - Research Paper Example These positions were accepted because the women were safe of capture. The Soviet Union in large scale used women near/in the front lines as the medical staff and political officers. Sniper female units were also set and also combat fighter planes. In the Soviet Union and Yugoslavia, a few women were used in combat roles, in resistance movements. After 1945, all the women combat roles were ended in all armies and their experiences got forgotten (Campbell, 301-323). While the Australian government plans to open up women combat jobs in 2016, New Zealand offers no restriction on the women roles in their defense force. They can serve in infantry, artillery, armor and a special air service. Norway is the first known country to permit women to serve on its submarines. (This was in 1985). In fact, the first female commander of a Norwegian submarine was Kret Solveig in 1995. In Sweden, women can serve in any if not all positions in the military since 1989. Today, about 5.5 percent of the officers are women. In WWI and WWII( first and the second World War), women served in many roles e.g. the Army Nurse Corps as well as the Womens Army Corps. They carried out different tasks such as clerical work, photo analysis, mechanical work and sheet metal working. The qualification of enlisting became the same for men as well as women in 1979 in the US. However, in 1994, the Department Of Defense(DOD) officially banned American women from serving in combat but th is ban would only last for nine years. On January 24th, 2003, Leon Panetta (secretary of defense) removed the ban. It is clear that women cannot physically compete with men. With rare exceptions, many women are unable to lift heavy stuff/weights, scale barriers or to pull themselves along a rope that has been suspended above a safety net. If women and men are sought according to sex and tested by making two mile runs, the result will suggest that the average woman took 18 minutes while the